The weather in CT just started to feel like fall (65 and sunny is actual perfection). For some reason, this ideal outdoor temperature makes me want to do all the D-I-Y projects. A few years back, I snagged this desk for FREE on Craigslist and attempted to spray paint it. I surprised myself because it turned out much better than expected. I hope this tutorial inspires you to hit up a tag sale or Craigslist to give new life to a piece of furniture that you “made all by your bad ass self”.

HOW TO SPRAY PAINT WOODEN FURNITURE

It’s truly amazing what a little paint can do. It can completely transform something from old and ratty to updated and fresh. Who would ever think spray paint could be used to DIY an old craigslist find into something beautiful?!

This tutorial is not the end all be all in furniture painting, it’s just how I did it.

I started with this desk. (click here to see how I got it)

The desk was stained, a little burned, and scratched.

I drove to Lowes and picked up primer, spray paint, clear sealant, fine grit sand paper, and tack cloth. I also bought satin nickel paint for the hardware (but I didn’t end up using this because I liked the way the original hardware’s finish looked). This all totaled up to about $25. Sweet.

The first thing I did was remove all the hardware with a screwdriver.

I sanded the surface a little to get any previous sealant off. In the places it was dinged or scratched, I used a little elbow grease and just sanded a bit more until it felt smoother. I didn’t sand every inch. It didn’t need to be perfect.

Remove all drawers and give the faces of them a quick sand also.

I used a sandpaper block because the it was easier to hold than paper, plus since it was flat, the desk top was uniformly sanded.

Run over the entire surface area with a tack cloth. I didn’t know what a tack cloth was until now. It’s like less-sticky fly paper that picks up all the dust from sanding. Don’t skip this step. If you have a dusty surface, the paint will stick to the dust, not the desk.

Be sure to do this in a well ventilated space (ideally outside). Also, if you are at all concerned with the floor or grass you are about to paint on, be sure to cover it with a tarp. Don’t end up like me. Like me meaning in the dog house for a few days because you have successfully primed and painted your grass a lovely shade of Oceanic Blue.

Spray the primer on in long strokes. Try to hold the can about 8 inches from the desk. I put on 2 thin coats of primer.

Yes, I primed the grass by accident.

I waited about 10 minutes in between coats.

Don’t forget to prime the drawers too!

Next up was my favorite part. COLOR!

When you spray paint the color on, use long, even strokes.

(Before I got to this point I found random plastic in our garage to put under the legs in an attempt to save the lawn)

Don’t panic like I did when the paint looks like this after one coat…

After 3 thin coats, the streaks disappeared.

Again, don’t forget the drawers!

After the paint dries, It’s time for the clear sealant. I chose a satin finish to try to mask the spots that I didn’t sand as well as I thought I did.

Evenly spray 2 coats of this stuff on the furniture.